$22.49
Brand: Shutao
Features:
Details: XH-W3001 microcomputer temperature controller
Supply voltage: 24V
Temperature measurement range: -50℃~110℃
Temperature control range: -50℃~110℃
Temperature control accuracy: 0.1℃
Load power: 240W
Measurement input: NTC10K waterproof probe
output type: direct output
Output capacity: max 10A
Instructions:
To set the startup temperature:
Press the up button once to display the startup temperature, press and hold the up button for about 3 seconds, the startup temperature number will flash, and the desired temperature value can be set by the up and down buttons
Set stop temperature:
Press the down button once to display the stop temperature, long press the button for about 3 seconds, the stop temperature number will flash, and the desired temperature value can be set by the up and down buttons
Reset:
When the power is on, press and hold the up and down keys at the same time, the digital tube displays 888 and then automatically jumps to the detection temperature, that is, restores the factory settings
Use cases:
Control the water heater, stop heating when it reaches 65 ℃, and start heating again when the temperature drops back to 50 ℃. How to set it?
Step 1: confirm that the working mode is heating mode and start it
Temperature Step 2: long press the up button to start the temperature flashing, and set the start temperature to 50 ℃ through the up and down buttons.
Step 3: long press the down button to stop the temperature flashing, and set the stop temperature to 65 ℃ through the up and down buttons. The setting is completed!
Setting mode of refrigeration mode
Setting Essentials:
Start temperature > stop temperature (the program automatically determines that the working mode is refrigeration mode)
Setting method:
1. Long press the up button, the start temperature flashes, and set the start temperature value thr
UPC: 701715533042
Package Dimensions: 34x130x100