8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

Brand: AXOTEN

Color: grey

Features:

• 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating.
• 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable.
• 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm.
• 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please feel free to contact me and we will provide you with technical support.
• 【Mining rig case package】 Including: motherboard, Intel CPU, 128GB SSD, 4G RAM, 4500 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, 15pcs screws package.

Details: 8 GPU Slots Mining Rig Case Specifications:
Motherboard: 8 cards in-line PCI-E spacing 68MM
CPU: Inter1(R) Celeron CPU 847
RAM: DDR3 4GB
Hard Disk: 128G SSD MSATA
Power leads: 6+2PIN
Cooling fan: 8 fans 2500-4500RPM
USB: Rear*2
Network port: Gigabit RJ45 interface RTL8111E
Display interface: HDMI
AC: AV110V-AV260V
OS: Linux/windows

Tips:

1.Please use a GPU less than 35 cm in length. The rig is compatible with a single-channel power supply with size 2U, please use a single channel power supply.
2. If using a 2000W rate power supply:
When you run the GPU overclocking, it is easy to burn the motherboard and power supply and GPU. We recommend to use the GPUs under the rated power of the power supply. For example, when run the 3090/3080, 3090 rate power is 290W, the GPU overclocking power is about 350W. We recommend that you use 4 GPUs. Running 3070 and 3060 8 pcs is OK. Please reserve 300W for other consumption
3.

Mining rig troubleshooting :

We have done a quick test before shipment. The rig will be slightly problematic, possibly due to long-term transportation and violent express delivery. When you get the rig, don’t run GPUs immediately. Let’s first test if the rig work.
1. Power supply troubleshooting

Check the power supply to see if the fan is turning.
2.Motherboard troubleshooting

Connect the keyboard to the computer, Press the Num Lock light on the keyboard. If the light remains off, the motherboard might be at fault. If the Num Lock light on and press again, the Num Lock light off, there is no fault with the motherboard.
Other Tips
1. Install the system

The SSD MSATA we configured is not installed with the system, You can log in to the official website of the corresponding system to download, there is a corresponding installation tutorial.

UPC: 755709148835

Package Dimensions: 251x707x12079