AITIAO 4Pcs for Nano V3.0 ATMEGA328P Module CH340C Chip 5V 16MHz Without USB Cable, Type-C Connection Compatible with Nano V3.0

Brand: AITIAO

Color: Type-C Soldered

Features:

• The for Nano is using the chips ATmega328P and CH340, Replace FT232RL.Support for external 5V~12V DC power supply, Support power supply by 9V battery.
• It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
• The module can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
• Uses the CH340G instead of the FTDI FT232RL IC which can improve the transfer speed, increase the stability in windows and solve the issues with FTDI drivers bricking non-original chips, ATMEGA328P offers even more programming and data memory space. It also has a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one side, power, and ground on the other).
• You will receive 4pcs for Nano V3.0 Module, each module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers)

Details: Description: Microcontroller: ATmega328; Architecture: AVR Operating Voltage: 5 V Flash Memory: 32 KB of which 2 KB used by bootloader SRAM: 2 KB; EEPROM: 1 KB Clock Speed: 16 MHz;Analog I/O Pins: 8 DC Current per I/O Pins: 40 mA (I/O Pins) Input Voltage: 7-12 V; Power Consumption: 19 mA PWM Output: 6; Digital I/O Pins: 22 Input and Output: Each of the 14 digital pins on the Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. Some pins have specialized functions. Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the CH340G USB chip.

Usage.
1. Download the IDE
2. Download the CH340 driver
3. Plug in the Nano development board, the driver will be installed automatically
4. Select the board Nano in the die
5. Finally use the new COM port as port, this can be checked in my computer, just inside your development board port

Package included:
4pcs for Nano V3.0 ATmega328P CH340G Controller Board USB Type-C Connector
If a schematic is required, please contact us

UPC: 701715511507

Package Dimensions: 23x144x32