$197.49
Brand: Eujgoov
Features:
Details: Specification: Item Type: Stepper Motor Driver Model: DM608-EC Material: Aluminum alloy Purpose: Stepper motor drive Operating Voltage: DC24V-50V Current: 0.3-6.0A Adapted Stepper Motor: 20 28 35 42 57 60 86(Nema8 Nema11 Nema14 Nema17 Nema23 Nema24 Nema34) Package List: 1 x Stepper Motor Driver How to Use: DIP Switch Function Setting SW4 Static Current Setting: ON=current mode, OFF=half current mode SW5 Motor Direction Selection: ON=rotation in positive direction (CW), OFF=rotation in reverse direction (CCW) SW6 SW7 Filter Time Setting: When it is ON or ON at the same time, it can be set by software. The value is 25MS and the resolution is 0.1MS. The longer the filter time, the better the acceleration and high speed performance, but the interpolation effect will be worse. SW8 Self Test Function Setting: ON=Drive and motor enter automatic operation mode OFF=No self test, can receive bus communication command control PC Software Parameter Setting 1. The driver is a standard EtherCAT slave device and follows the standard sub protocol stack. Any host computer that supports this protocol can communicate with it. 2. DM608‑EC can Run in 3 Motion Modes: PP (position mode), PV (speed mode) and Homing (home mode). Note: 1. Do not connect the power reversely, and the input voltage should not exceed DC50V. The blue indicator light PWR is on when the drive is powered on. 2. When the current is too high or the voltage is too low, the blue indicator light flashes.
Package Dimensions: 50x130x293