Dorhea 5PCS ADXL345 Digital Inclination Sensor Acceleration Module Digital Tilt Angle Sensor Gravity 3-Axis AVR ARM MCU

Brand: DORHEA

Features:

• ADXL345, it’s a low cost cap-based accelerometer sensor, 3-axis accelerometer with high resolution (13-bit), high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°.
• Digital output data is formatted as 16-bit twos complement, supports I2C/SPI, low power, compact accelerometer.
• The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock.
• Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds.
• individually to either of two interrupt output pins.

Details: Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical)
Power consumption scales automatically with bandwidth
Fixed 10-bit resolution
Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges)
Module supply voltage range: 4.0 V to 6 V
I/O voltage range: 1.7 V to 3.6V
SPI (3- and 4-wire) and I2
C digital interfaces
Flexible interrupt modes mappable to either interrupt pin
Measurement ranges selectable via serial command
Bandwidth selectable via serial command
Wide temperature range (−40°C to +85°C)
10,000 g shock survival
Pb free/RoHS compliant

Several special sensing functions are provided:
Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds.
Tap sensing detects single and double taps in any direction.
Freefall sensing detects if the device is falling.
These functions can be mapped individually to either of two interrupt output pins.

Pin definition:
5V: 5V power supply
3V3: 3.3V power supply
GND: ground
Vs: supply voltage
CS: chip select
SCL: I2C serial clock line/SPI clock terminal
SDA: Serial Data (I2C) / Serial Data In (SPI 4-wire) / Serial Data In and Out (SPI 3-wire)
S DO: Serial Data Output (SPI 4-wire) / Alternate 12C Address Select (I2C)
INT 2: Interrupt 2 pin
INT 1: Interrupt 1 pin
Instructions for use:
Note that the address of the module in 12C mode is determined by the S DO pin

Package Included:
5 x ADXL345 Gravity Sensor Acceleration Module

UPC: 701715461758

Package Dimensions: 27x107x18