Brand: Alomejor
Features:
- ?GOOD PERFORMANCE?With low speed and high torque, good performance. Two?way communication, you can check the power of the scooter through the remote control. Multiple protections, with low voltage alarm function, undervoltage and power failure protection. The sinusoid solution makes it more stable than ESC and not easy to burn out. Suitable for scooters, unicycles, balance scooters.
- ?GOOD PERFORMANCE?With low speed and high torque, good performance. Two?way communication, you can check the power of the scooter through the remote control. Multiple protections, with low voltage alarm function, undervoltage and power failure protection. The sinusoid solution makes it more stable than ESC and not easy to burn out. Suitable for scooters, unicycles, balance scooters.
- ?NOTE?1. Confirm the voltage of your battery(6 series battery is 25.2V, 7 series battery is 29.4V, 10 series battery is 36V). 2. Confirm the motor type(External motor, chain, belt drive, use belt controller. Hub motor, motor integrated wheel, please select the controller with the word ?hub?). 3. Confirm single drive dual drive or four wheel drive(A controller drives a motor is a single drive. One controller drives two motors is dual drive. One controller drives four motors is four wheel drive)
- ?CONTROL SYSTEM?1. Connect the main controller to the power supply. 2. Turn on the power, wait for two seconds and then press and hold the key for about 6 seconds, let go when the switch indicator flashes. 3. Turn on the remote control switch and use a small screwdriver to press the button in the small hole in the lower left corner of the remote control. 4. Turn off the remote control and turn it on for two seconds.
- ?HALL WIRE CONNECTION DESCRIPTION?The brushless motor is controlled by 3 phases and 6 ways. 3 for hall states correspond to 3 motor wires and 6 output states. There are 36 connections for different combinations. Among them, there are 6 kinds of connections that can make the motor run normally, and 3 of these 6 kinds of connections are forward rotation and the other 3 are reverse rotation.
Details: Specification:
Item type: Scooter Controller Set
Material: Electronic components + ABS
Color: As picture shown
Weight: Approx. 280g
Drive mode: dual system drive
Induction method: for hall
Controller type and performance
Controller Types: T2 wireless dual drive
Operating voltage range : DC voltage 36V/24V
Total power of controller : 1300W
Control electric quantity : 2
Control motor type and performance
Motor type : DC Brushless Motor
Maximum power of motor : Within 650W
Motor speed :Within 8000 rpm
Can not connect the motor for hall: can not connect
Maximum power: 430W (36V)
Speed: 4200 RPM
Maximum speed: 35KM/H
Power connector: XT60 male plug
Carrying weight: ?120KG
Long distance distance: up to 20 meters
Protection: overvoltage, undervoltage, overheating, stall, CW/CCW, adjustable speed
Current: 12A
Voltage: 36V, 10S
Remote control built in lithium battery
The capacity of the remote control: 400MAH
Total length of remote control: Approx. 12cm/4.7in
Remote control length: Approx. 6cm/2.4in
Circuit board size: Approx. 10.5x8cm/4.1×3.1in
Application areas: scooters, unicycles, balance scooters
Note: Different voltage, alarm voltage, protection voltage are different
Suitable for hub motor model airplane motor 5055 5065 6354 6364 6374 6384 How to choose the right controller:
Package List:
1 x Scooter controller
1 x Remote control
1 x USB data cable
2 x Accessories
1 x Control panel
Package Dimensions: 43x203x730
