Encoder Metal Gearmotor 12V DC Low Speed 35RPM Gear Motor with Encoder for Arduino and 3D Printers

Brand: Bemonoc

Color: 12V

Features:

• ✔Product type: DC Gear motor with two-channel Hall effect encoder;Rated Voltage: 12V; No-Load Speed: 35RPM; No-Load Current: ≤ 0.12A;Rated Torque: 4.5kg.cm;
• ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D); Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off;
• ✔Single Output 1980 Pulses Per Revolution: Gear Reduction Ratio: 1/165, Each Loop Output Pulses: 12PPR 165*12=1980PPR;
• ✔Wiring Diagram: Red – Motor power terminal (+);Black – Motor power terminal(-);Green – Quad encoder Ground;Blue – Quad encoder +5V Vcc;Yellow – Quad encoder A signal;White – Quad encoder B signal;
• ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy.

Details: The rear of the motor is equipped with a dual channel Holzer effect encoder, AB dual output, single circuit per cycle pulse 12PPR, double down the road, a total output of 48CPR. Phase difference 90 degrees.

The two-channel Hall effect encoder is used to sense the rotation of a magnetic disk on a rear protrusion of the motor shaft. The quadrature encoder provides a resolution of 48counts per revolution of the motor shaft.
To compute the counts per revolution of the gearbox output, multiply the gear ratio by 48.

Notice: 1.Be sure to keep the wiring connection correct before Working;
2.Be sure to keep the motor stopped before change the CCW/CW direction; Or the motor will be burned!!!

UPC: 734779751213

Package Dimensions: 51x127x136