EWO’S LMP-H202 LMP-H201 Replacement Projector Lamp Bulb for Sony VPL-HW30AES HW30ES HW50ES HW55ES VW95ES HW30 HW30ES SXRD HW40ES Projector

Brand: EWO’S

Features:

• BRANDED MANUFACTURE: 100% new replacement projector lamp bulb with same functioning as your origin. Perfect match and compatibility for your projector.
• FEATURES: This is the lamp with housing, be difference from a bare bulb. Same brightness and durable lamp wick as the original bulb. Outputing high definition pictures as you expected.
• COMPATIBLE MODULES: Applicable fit for SONY VPL-HW30AES HW30ES HW50ES HW55ES VW95ES HW30 HW30ES SXRD HW40ES HW10 VW80 HW15 VW85 GH10 HW20 VW90ES VW70 Projector Lamp Bulb Replacement
• INSTALLATION AND SAFTY: You will find it is quite easy to install it into your projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well. It is not electric, shut down your projector when you install it.
• WARRANTY AND RETURN: New replaced lamp will be shipped to you when your bulb was out of work naturally in 150 days. Refundable issue please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.

Details: Parameter:
EWO’S new replacement projector bulb with housing.
Perfect match is only applicable to your correct projector model.
Voltage: 220V
Power: 200W
Lamp Life: 2000 hours
Installation:
1. Turn off the projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a Philips screwdriver, and then open the lamp cover.
3. Loosen the 3 screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 3 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.
Warm Noted:
Be sure to use an LMP-H202 Projector Lamp for replacement.
If you use lamps other than the LMP-H202, the unit may malfunction.
Be sure to turn off the unit and unplug the power cord before replacing the lamp
Then check the ON/STANDBY indicator has already been turned off.
The lamp remains hot after the unit is turned off with the (ON/STANDBY) button.
If you touch the lamp, you may burn your fingers. When you replace the lamp
Wait for at least 1 hour for the lamp to cool. Do not touch the surface of the lamp
If you touch it, wipe off the fingerprints with a soft cloth

UPC: 737420738915

Release Date: 21-09-2018

Package Dimensions: 129x137x299