Brand: DIYmall
Features:
- Document link: https://tinyurl(DOT)com/Fringerprint-Sensor
- Adapter FTDI FT232 Cable link:https://www(DOT)amazon(DOT)com/dp/B014GZTCC6
- Connection with diymall R3 board:pin #2 is IN (GREEN wire),pin #3 is OUT (WHITE wire),5V connect sensor (Red wire),GND connect sensor (Black wire) Connection with diymall 2560 board:pin #10 is IN (GREEN wire),pin #11 is OUT (WHITE wire),5V connect sensor (Red wire),GND connect sensor (Black wire)
- Use:Typically used in safe -there’s a high powered DSP chip that does the image rendering, calculation, feature-finding and searching
- What you will get is: 1 x Optical Fingerprint Reader Sensor Module. If any question, pls contact us by email.You can find ” Sold by DIYmall” under Buy Now button, click “DIYmall” and you will get to a new page, click “Ask a question”.
Details: NOTE: Please use IDE 1.6.6 Features: Make adding fingerprint detection and verification super simple. Typically used in safes-there’s a high powered DSP chip that does the image rendering, calculation, feature-finding and searching. Connect to any microcontroller or system with TTL serial, and send packets of data to take photos, detect prints, hash and search. You can also enroll new fingers directly – up to 162 finger prints can be stored in the onboard FLASH memory. There’s a red LED in the lens that lights up during a photo so you know it is working. Specifications: Supply voltage: DC 3.8-7.0V Operating Current: