Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse

Brand: Inkbird

Features:

• 【Output】2 Relays, control the temperature by setting the temperature set value and the difference value.
• 【Mode】Automatic switch between cooling and heating modes, Fahrenheit and Celsius display can be choose.
• 【Calibration】Temperature calibrating, refrigerating control output delay protection.
• 【Alarm】When temperature exceeds the limit or when sensor error it will alarm. It can be used for peltier water cooling device, cooling fan, car’s 12v battery, 12 volt chest cooler,heater etc.
• 【Warranty】12V temperature controller with 1 years warranty.

Details: NOTE: The manual is the same with 110V manual. If the description on the unit is 12V, pls connect 12V device. Don’t connect 110V Device. Thanks for your understanding.

Mounting dimension:
Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm
Product Size：75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)

Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -58～210 °F / -50 °C-99 °C
Resolution: 0.1 °F / 0.1 °C
Accuracy: ±2 °F（-58 °F -160 °F）/ ±1 °C（-50 °C -70 °C）
Power Supply: 12V DC 50Hz/60Hz
Power Consumption: 3W
; Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VDC)/ Heating (10A/250VDC);
Ambient Temperature: 0 °C-60 °C
Storage Temperature: -30 °C-75 °C
Relative Humidity: 20-85% (No Condensate)

Package Content:
1x ITC-1000 Temperature controller 12V
1 x 2M Sensor

Package Dimensions: 36x102x159