Inkbird Dual Stage Temperature Controller Heating and Cooling with AC 100 to 240V ITC-308S and NTC Probe for Grow Room Fermentation Fridge Brewing

Brand: Inkbird

Features:

• 🌟🌟【Convenient Design】Support °F/ °C display. Easy to set, PV and SV dual display windows.
• 🌟🌟【Dual Relay Output】You can use the cooling device or heating device separately, or you can plug the cooler and the heater at the same time.
• 🌟🌟【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
• 🌟🌟【Waterproof Sensor】The temperature controller sensor is stainless and waterproof IP68.
• 🌟🌟【Alarm for Safe】Alarm when over-temperature and sensor error. Maximum output load: 1100W(110V).

Details: Features:
– Plug and play design, easy to use.
– Support reading with Centigrade or Fahrenheit unit.
– Temperature calibration.
– Compressor delay protection for refrigeration control.
– High and low temperature alarms are available.
– Over-temperature and sensor fault alarm.
– Heating/Cooling differential function could be set separately for cooling and heating to protect temperature controller from violent change.

Specification:
Temperature Control Range : -50~120°C / -58~248 °F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy: ±1°C (-50~70°C) / ±2°F (-58~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308S Temperature Controller
1x 1.97″ Female to Male NTC Sensor
1x Manual

Package Dimensions: 86x192x476