Inkjet Printhead Cleaner for 950 951 952XL Ink Cartridges Work with Officejet Pro 8600 8610 8620 8100 8710 8720 8216 8210 8730 Printer Cleaning kit- 100ml

Brand: TBTeek

Features:

• ⛔👉Note: This Printhead cleaning fluid only solve illegible marks caused by print head clogging.(vertical stripes, horizontal stripes, text printing or incomplete patterns) Please print a “nozzle check” pattern before purchasing this printhead cleaner. If your printer prompt error and can’t print or printhead is missing, printhead error, not properly installed, pls do not purchase this product, it can’t solve your problem.
• Inkjet printhead cleaner contains high-performance ingredients such as active enzymes, strong cleaning, Eco-friendly material could protect the print head. 80-90% success rate with a $14.99 refund if it doesn’t work(Depending on the length of inactivity of your printer will determine the effectiveness of this product.), Need not to disassemble the print head with simple operation.
• It’s safe and simple to use! No need to wait for a clog to ruin your print job and save your money to buy a new printer. Depending on your printer model, you may need to run several print head cleaning cycles, It’s about 2-3 times to completely flush the cleaning solution. The effectiveness of this product depends on the time of inactivity of your printer.
• Printhead cleaner applies to OEM/factory ink, dye, pigment, sublimation ink, heat transfer ink and alike. Don’t use this product if the “nozzle check” appears the pattern
• For printer models: 8630 8640 8650 8660 8515 8530 8615 8625 8635 8680 8730 7730 8218 8700 8745 251dw 276dw 8714 8717 8724 8726 8727 8734 8735 8736 8743 8744 8746 8747 8200 8702 8715 8716 8725 8728 8740 7720 7740

Details: Printhead cleaner is used for 950 951 952 932 933XL ink cartridges only, not for 902XL 564XL ink cartridges.

How to use?
1.Pre-heating the cleaning fluid.
2.Remove ink cartridges and the print head.
3.Choose the right type of syringe according to the color of the clogged print head that needs to be cleaned.
4.Leaving the bottom of the print head be soaked for about 8 hours. then Inject the cleaning fluid into the print head that needs cleaning with a syringe.
5.Install the print head into the ink cartridge and load the printer, then run the “nozzle cleaning” function twice in printer driver.

PS: Please refer to the manual instructions for more details.

Notice:
1.After removing the ink cartridges, you could wrap them in plastic wrap and put them in a ziploc bag to prevent them from drying out.
2.The print head must be completely dry after being soaked, and then it can be installed in the printer. Otherwise it may cause short circuit that will lead to the damage of the print head.
3.Don’t skip the longer soak if the shorter ones don’t work. If that fails, It is recommend to try again after a day or two.

Package:
1× Printhead Cleaning Fluid(100ml)
1× Syringe(10ml)
2x Syringe tube
1× instruction manual

Package Dimensions: 59x120x141