JDIAG TPMS Relearn Tool for GM and Ford Series Vehicles Super EL50448 Auto Tire Pressure Monitor Sensor Activation Reset Tool Upgrade Edition

Brand: JDIAG

Color: Super50448 For GM Ford

Features:

• 2023 Updated Generation Super EL50448 TPMS relearn tool is an essential tool of replacement tire pressure sensor, tire pressure alarm remove or exchange tires.
• This TPMS reset tool works on most GM/Ford/Buick/Cadillac/Chevy/GMC/Saturn/Pontiac/Saab/Opel/Lincoln/Mercury equipped with 315/433 MHz tire sensor.
• Super EL50448 can help you reset all tires much easier just with 3 steps. Ensure that the vehicle is in the TPMS Learn Mode, and follow the service procedure. Hold tool against the sidewall of the tire, near the valve stem. Depress Learn button while holding the tool against the tire sidewall.
• Tire pressure monitor sensor activation tool is simple and fast ,activates the individual TPM sensor with the press of one button easily within 1-2 Mins.Save your almost 20-80$,.Much better than going to the dealer or a tire store just to get your pressure sensors reset.
• Notice: 1. When using Super EL50448, please make sure antenna in correct position. 2. Please make sure the 9v battery in good condition. 3.For Different vehicle EL50448 may need different times to reset all of your tire sensors after rotation. 4. 12 months guarantee, please feel free to contact us if you have any trouble during use.

Details: How to switch between GM and Ford brand?
Hold the power button for 3 seconds and 2 LEDs flashing 2 times, selected brand’s LED flashing 2 times.
How to detect which mode the device in?
Press the power button, if the Green LED flashing, means Super EL50448 in GM mode, if Yellow LED flashing, means Super EL50448 in Ford mode.

How to use Super EL50448?
1. Need 1x Pcs 9V battery to work
2. Set the car in TPMS learning mode. (car horns twice)
3. Starting from the left front tire, the antenna of the dedicated tool for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release the button and wait for the speaker to emit a chirp. Once the speaker is chirping, the sensor information is read and the turn signal to be read at the next position will light.
4. Follow this order to rest TPMS one by one: Front left, front right, rear right, rear left.
5. After all sensors reseted, the car horns twice, the TPMS re-learn finished.

How to set my car in TPMS re-learn mode?
GM series cars:
1. Make the gear in P position.
2. Use cruise to choose TPMS re-learn mode in the dashboard settings.
3. Horn will ring twice and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tire
Ford series cars:
1. Make the gear in P position.
2. With the ignition switch to OFF, press and release the brake pedal
3. Turn the ignition switch from the OFF position to the RUN position 3 times and end at RUN position
4. Depress and release the brake pedal
5. Ignition to OFF position
6. Ignition goes from the OFF position to the RUN position 3 times and ends at RUN position
7. Horn will ring once and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display

Package Dimensions: 39x159x159