Keenso Trailer Light Tester- Trailer Wire Tester 7 Pin Tester Trailer 12V Car Black 7 Pin Trailer Tester Socket Connection Diagnostic Tool

Brand: Keenso

Color: popular

Features:

• ☆【ABS & Copper Hi-Impact Resistant Housing】 Trailer light tester is made of ABS & copper hi-impact resistant housing. Circuit testers has a compact and ergonomic design with texted side design for grip
• ☆【LED Diodes】 To produce a bright, easy-to-read signal and ensure long-lasting use, this trailer wire tester is constructed with LED diodes
• ☆【Easily Identified】 7 pin tester trailer has sturdy junction box with color marked 7-poles that can be easily identified, gives you more convenience for wiring left/right turn light, brake signal lamp, reverse light, tail light, etc
• ☆【Guarantee】 6 function trailer lights tester kit provide several months refund service and 1 year warranty service. Please feel free to contact us if you have any question of trailer circuit tester
• ☆【Package list】 Trailer light tester – Electrical tester includes K4216,1 * 7-Pin Trailer Tester Tool,1 * English Guide Paper. Please confirm that the goods you received are complete

Details: Specifications:
Main Material: ABS & Copper
Color: black
Item Type: Diagnostic Tools
Item Name: Trailer Tester
Size: approx. 20 * 5 * 4cm
Battery Type: 9V (not included, you need additional purchase)
Package Size: 20 * 5.5 * 4.5cm / 7.9 * 2.2 * 1.8in
Package Weight: 194g / 6.8oz

Package list:   K4216
1 * 7-Pin Trailer Tester Tool
1 * English Guide Paper

Function & guide:
Trailer (can also be a caravan or bicycle carrier)

Put the plug in the connection of the tester.
Press the yellow button on the side of the tester. If the wiring is good, all the LEDs light up. the function of each LED is (acc lso 1724):
1. left hand indicator (yellow);
2. foglight or 12V (blue);
3. mass (white);
4. right hand indicator (green);
5. right rearlight (brown);
6. left brake light (red);
7. left rearlight (black). Attention: The pin no 2 can be used either for a warning foglamp or a permanent 12V connection.
If a LED doesn’t light up, it is because the corresponding wire is defective. If all the LEDs don’t light up, then the mass wire is damaged or all bulbs are defective.

Car, camper
1. Put the tester in the socket of the car.
2. Press the yellow button on the side of the tester.
3. If the wiring is good, all the LEDs light up. Do again steps 4 as previous.

You can also test the functions of each pin of the socket.
1. Switch on the left hand indicator (after switching on the ignation key).
2. The corresponding LED must flash with the same frequency. If not, left hand indicator wiring is defective/broken.
3. Repeat steps 1 and 2 for the right hand indicator, rearlight, foglight and stoplights.
With a +/- 4 m extension cable, you can test the functions form the driver’s seat more easily.

UPC: 769963741176

Package Dimensions: 48x251x170