Rear View Backup Camera System Reversing Kit AHD 720P Wired 7″ LCD Monitor,Night Vision,IP69K Waterproof Camera for Tractor/Motorhome/Bulldozer/Camper/Van/Heavy Equipment/Forklift/Skid Loader

Brand: Evervox

Features:

• 【7” One-Camera Kit】 This Is A Wired 7” Backup Camera System With A 49Ft Extension Cable. It Is Designed Solely To Assist The Driver By Improving Visibility And Reducing Known Blind Spots. It Can Be Used For Trucks, Vans, Mini Buses, Forklifts, Skid Loaders, Excavators, Farm Equipments, Motorhomes, Rv, Campers, Etc.
• 【High Definition Monitor】7” Hd 720P Monitor(Not Split) Provides Super Clear Image. It Has Free Power Input Range Dc12-32V. And It Takes Up To 3 Cameras. Monitor Can Be Automatically Activated By The Trigger Wire To Display The Camera When Reversing. After Reversing, It Goes Back To The Original Mode. It Not Only Can Be Used For Reversing, But Also Can Be On All The Time. A Short-Circuit Protector And A Tvs Device Are Built In To Keep The Monitor From Being Damaged.
• 【Heavy Duty Camera】Camera Comes With The Ip69K Waterproof Rating, And 10G Vibration-Proof Rating. These Ensure The Camera Work Well In Extreme Conditions. With 12 Ir Lights, The Driver Also Can See Clearly What Is In The Blind Spots At Night Or When The Ambient Light Is Low.
• 【Normal/Mirror Image】The Image Can Be Rotated By Buttons On Monitor. It Allows The Camera To Be Mounted In Any Directions, Up-Side-Down Or Horizontally，Just Press The Button To Get A Right Image On The Monitor.
• 【Easy To Connect】This System Has No Different Types Of Connectors. All Of Them Are 4-Pin Connectors, You Just Need To Plug Them Together One By One In Sequence. Then Power It By Rear Lamp, It Works.
• Connector Type: Four-Pin Aviation Connector

Details: PACKAGE INCLUDING:

A. 7 INCHES WIRED SINGLE VIEW MONITOR X1
B. AHD 720P WATERPROOF CAMERA X1
C. 49FTETERS EXTENSION CABLE X1

D. MONITOR POWER CABLE X1

MONITOR SPECIFICATION:

7 Inch Wired Color Single View AHD monitor
Resolution: 1024(RGB)*600
TV System: NTSC/PAL
Multiple menu languages
Brightness;450cd/m2
Support 3 cameras video input
Separate trigger control wires forAV1,AV2,AV3.
Menu to set up reversing image delay time 0-15s, mirrorrmal image.
Monitor will automatic switch-over the image to related camera and back to
the original mode when the trigger stops.
In standby mode, monitor will turn on automatically when triggered and will
switch to back up camera image，Trigger end after shutdown
Working voltage: DC12V to 36V
Keys with LED backlit
Built-in short-circuit protector(When installing and connecting the kit,
people connects the female 4 pin connectors to the male one from the camera
and monitor, they sometimes connect the video pin of the camera to the power
pin of the monitor. It may cause a shortcut, the builtin protector may keep
the monitor away from being burnt.)
◇Guide line appears when it is set as ON and monitor is triggered
by the trigger wire

CAMERA SPECIFICATIONS:
sensor：SONY AHD 720P
Video format:NTSC optional
Lens:2.5mm
Lens Angle: 120 degree
Infrared LED light: 18PCS
IR Distance:35ft
Waterproof Rate:IP69K,
Housing:aluminum alloy (camera never gets rusty, and has a higher
ability in heat radiation than iron housing.)
Dustproof, waterproof, hydrochloric acid prevention, explosion prevention

UPC: 602938046732

Package Dimensions: 103x347x2041