SANIFLO Sanicompact – Dual-flush System – Residential

Brand: SANIFLO

Color: White

Features:

• BONUS HALF BATH: The Sanicompact is a self-contained dual-flush toilet system used to install a half bathroom up to 9 feet below the sewer line, or even up to 120 feet away from a soil stack. For residential use only.
• DUAL PURPOSE: The Sanicompact will also discharge gray water from a sink. The wastewater drains into a 1.25” hose connection in back of the toilet.
• EFFICIENCY AT ITS FINEST: The standard dual flush version uses 1.28 gpf or 1 gpf and uses less water than any regular toilet but with the same efficiency. The push button activates a timer and a solenoid valve in order to fill and wash the bowl.
• TECHNICAL SPECIFICATIONS: Motor: 0.5 HP oil-filled thermally protected; Noise level ≤ 53 dBA (Lp) (measured at 3 ft.); Discharge rate at 9 ft: 24 GPM; Certification code: CSA (IPC, NSPC); Connections: Sink
• 3 YEAR WARRANTY: All of Saniflo’s products have a 2 year warranty with purchase, and an extended year with registration. Our warranty program can offer peace of mind, should a problem arise.
• SERVICE CENTER based in the US

Details: Product Description Saniflo is the world leader in the plumbing industry as a result of the above-floor technology used in Saniflo pumps. Saniflo has a complete range of pumps for both residential and commercial needs. The innovative method of using above-floor technology allows for the installation of any sanitary application you can imagine, anywhere! Whether it’s a small project requiring drain and condensate pumps to more complex engineered jobs such as whole buildings with multiple fixture units, Saniflo has a solution; All you need is water supply and electricity. From the Manufacturer The SANICOMPACT is a self-contained toilet that’s ideal for fitting into tight spots where conventional toilets can’t fit. This modern shaped self-contained macerating toilet is very water efficient, using just one gallon of water per flush. It was designed with several purposes in mind such as limited space, green conscious users that want to save water, and for people with physical limitations requiring easy access to a toilet. The SANICOMPACT can be installed in many locations such as a loft/attic, upper floor, ground floor, basement and even a garage. It’s very easy to install in areas such as under the stairway for a half bathroom or an additional half bathroom in a bedroom or garage conversion. It can handle the effluent from a toilet and sink. It needs no toilet tank as the flushing action and macerating pump cycle is automatic after pressing a push bottom (air switch) on top of the bowl. The flushing mechanism is electronically timed to allow approximately 1-Gallon of water to pass through the toilet. The discharge elbow on the back of the SANICOMPACT can be rotated 360 Degree to fit any type of installation requirement. A non-return valve, which comes already assembled on the discharge elbow, prevents back flow into the unit. The SANICOMPACT is a forced main and does not need to be vented and connected to a vent stack. Other fixtures may need to be vented as per local plumbing codes. It is also highly recommended for the macerator/pump to be connected to a Ground Fault Interrupter circuit. Remove the bowl and then mark the position of the fixing brackets ½ inch inside the traced

UPC: 775937000231

Package Dimensions: 648x953x28213