Silicone Hose Kit for Ford F150 5.0 V8 or 3.7 V6 or 3.5 V6 EcoBoost Engine 2011-2016 and Compatible with Ford Expedition 3.5 V6 EcoBoost Engine 2015-2017, Black

Brand: WLFINKMO

Color: Black

Features:

• FITS: for Ford F-150 with 5.0L V8, 3.7L V6, or 3.5L V6 EcoBoost engines 2011 2012 2013 2014 2015 2016.
• FITS: for Ford Expedition with 3.5L V6 EcoBoost engine 15 16 17, and for Lincoln Navigator with 3.5L V6 EcoBoost engine 2015 2016 2017.
• PACKAGE: 1 x 90 degree elbow reducer ID 3/4″ to 1″, 1 x aluminum joiner OD 3/4″, 2 x small clamps, 2 x large clamps.
• FUNCTION: This kit has been assembled to address the persistent leak. Does not fit the 4.6L, 5.4L, or 6.2L V8 engines.
• ENSURE: If there is any problem with the product, please do not hesitate to contact us, we will help you solve the problem.

Details: Installation:

1. Install the aluminum joiner in the lower hose and secure with one small hose clamp.

2. Slide the small end of the reducing elbow onto the aluminum joiner, securing with one small hose clamp.

3. Slide the large end of the reducing elbow over the nipple on the coolant reservoir. Be sure to slide the hose far enough that you can position one of the large hose clamps above the clip slot.

4. The hose should very nearly touch the reservoir body. This is critical to prevent the hose from coming off under pressure.

5. Install one large hose clamp on the reducing elbow below the clip slot. This clamp will create the liquid-tight seal.

6. Install the second large hose clamp on the reducing elbow above the clip slot. This clamp will keep the hose in place. Installation usually takes less than 2 hours.

UPC: 791738704574

Package Dimensions: 35x208x272