SparkFun Qwiic MultiPort Add I2C ports via Qwiic connectors to boards that only have one I2C port on their I2C bus Alternative daisy chained configuration 2x mounting holes Board size 1 inch by 1 inch

Brand: SparkFun

Color: Red

Features:

• The SparkFun Qwiic Multiport adds additional ports to boards that have only one Qwiic port on their I2C bus.
• Once added, you can use it as a hub to add as many I2C devices to the bus as you need! You can also use the board as an alternative to a daisy chained configuration.
• This board has 2x mounting holes located around the center.
• The overall size of the board is 1.00″ x 1.00″. Each connector extending from the center has a width of about 0.30″.
• Includes: 4x Qwiic Connectors; 2x 4-40 Mounting Points

Details: Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to boards that have only one Qwiic port on the I2C bus. Once added, you can use it as a hub to add as many I2C devices to the bus as you need! Included are mounting holes so that the board can be secured to any system. There are 4x Qwiic connectors populated on the board. In addition to the connectors, there is an LED to indicate when power is available on the I2C bus. On the back, there is a jumper in case you would like to disable the LED. Below are the board dimensions. The overall size of the board is 1.00″ x 1.00″. Each connector extending from the center has a width of about 0.30″. As stated earlier, this board has 2x mounting holes located around the center. If you are looking to connect more than one device with one Qwiic connector to your development board, you will just need a Qwiic MultiPort board and an additional Qwiic cable for each device. The Qwiic MultiPort can also be used as a hub so that you do not have to place the board with one Qwiic connector at the end of the daisy chain.
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

UPC: 845156011360

Package Dimensions: 4x91x5