$31.49
Brand: Spurtar
Color: Gold
Features:
Details: Spurtar Tire Deflators and 6-30 PSI Tyre Deflator Kit – Adjustable for car, Truck, Motorcycle
When you want to air your tires down quickly and easily, a set of Tire Deflators might just be the ideal answer.
The standard duty model is adjustable from 6 to 30 PSI, though 18-psi is ideal for most applications.
FEATURES
★No tools required to use the offroad tire deflator
★Tire deflator kit can be used on any standard valve stem
★Adjust tire pressure from 6 to 30psi. in 3psi increments
★Easily disassembled to clean out sand or dirt
★Simply thread onto stems and walk away
★Manual start/stop valve built in
★Made from 100% brass material to eliminate rust
★Air immediately releases from tire once screwed on
★ QUALITY GUARANTEE – ADD to YOUR BASKET!!!
PRODUCT DETAILS
Material: Brass
Pressure Range: 6-30 PSI
Overall Size: 12x39mm/0.47×1.54″
Interface Diameter: 8mm/0.31″
HOW TO USE
Step 1: Deflate a spare/extra tire to your preferred deflation pressure with a prifessional pressure gauge
Step 2: With the lock ring and adjusting cap wound down, screw your deflator onto the valve stem all the way in tightly,
otherwise deflation will be slow or stop at unexpected pressure PSI (Be sure to make sure the threads are clean and in good condition)
Step 3: Loosen cap (counter-clockwise) until deflator pops open, then immediately tighten the cap to the position where the air stops exhausting
Step 4: Turn lock ring up to adjust cap and tighten
Step 5: Installation is now complete and set to your preferred deflation pressure
Important Note:
1. Fully adjustable range is from 6~30 PSI. Airing down a tire from pressure 28 to 0 PSI takes around 4 minutes as our test.
2. Adjust the cap by screw it in clockwise to increase pressure, screw it out counter-clockwise to decrease pressure.
It only takes a very small amount of rotation to adjust the valve, 1/16th to 1/8th of a turn to adjust 1 psi.
3. Once you have all four adjusted, carefully tighten the lock ring with two pair of pliers being careful not to rotate the cap.
4. Adjustments to your deflators can be made at the rate of 3 psi per half turn of the adjusting cap.
5. When the tire pressure and the deflator setting is within 8 psi, a manual start may be required by fitting the deflator then lifting the center pin to start operation
6. Keep deflators clean and try. Do not interchange components.
PACKING INCLUDE
4 x Tire Deflator
WITTYWARE SUPPORT
If you have any further questions, please feel free sent us a direct message.
We would be more than happy to assist you 24/7!
UPC: 696177837213
Package Dimensions: 20x136x132