Brand: VIVREAL
Features:
- ➤【6-in-1 Wall Scanner】 The VIVREAL stud finder with digital level provides 5 scanning modes and digital level. The stud mode is for finding and locating the wood and metal studs in drywall up to 1/2″(13mm) deep & 1″(25mm). DEEP mode is for 1.5″(38mm) deep studs. Metal mode is for locating metal up to 2.36″ (60 mm) deep. And AC wires scan is for locating live AC wires up to 2″ (51mm) deep.
- ➤【Graphical LCD Display】Really clear graphical LCD. VIVREAL digital stud finder indicates many cues in detection, such as detection mode, signal strength, automatic calibration, battery indication with maximum readability. The angular measurement of the digital level will also show on the screen. With the aid of VIVREAL stud detector, you can easy to find the stud and know the angle which can help your detection simple but efficient.
- ➤【Automatic Calibration】Well equipped with automatical self- calibration technology, this stud sensor provides users with maximum reliability and accuracy. Please kindly noted that the calibration needs to be done by holding the stud finder on the wall where there are no wood studs, AC wires or metal. Completing calibration until the BEEP sound and screen shows disappear. VIVREAL wall stud detector will flash and beep once it has picked up the center of a stud.
- ➤【Sensitive Detector】Sensitive wall stud detector with sound and dynamic graphics. The wall stud scanner offers many visible and audible cues with its LCD and beep signal alert. The LED screen shows the detection of the target. The beep alert will be triggered when the stud is found. When the signal bar is full and the beep is loud, the center of the object has been found.
- ➤【Easy and Fast】 Easy single-hand operation and handy design. Mode Selecting button: On the middle of the wall stud detector is used for selecting from different scanning modes. Scan button: On the left side of the device. Press and hold to calibrate and scan. The VIVREAL stud finder wall scanner can help you easily read the information on the LCD screen and quickly detect the objects behind walls.
Details: A good stud finder can be the difference between a successful DIY home project and disaster. When hammering or screwing things into walls, ceilings, and floors, you need to know what is on the other side. Otherwise, you might damage drywall or flooring with unsupported items you are trying to install. That is why a stud finder is important.
This VIVREAL stud sensor wall scanner includes a backlit LCD graphic screen for low-light conditions and auto-calibration that makes setup a whole lot easier. Electronic Wall Scanner has 5 modes to choose, including a built-in digital level.
Stud scan: Locates the center and edges of wood and metal studs up to 3⁄4 in. (19 mm) deep.
Deep mode: Locates the center and edges of wood and metal studs up to 11⁄2 in. (38 mm) deep.
Metal scan: Detects metal (such as 1⁄2 inch rebar) up to 2.36 in. (60 mm) deep.
AC scan: Detects live unshielded AC wires up to 2 in. (51 mm) deep.
How to use VIVREAL stud finder?
Step 1: Press the button at the left side of device to power it.
Step 2: Slide the button on the middle of device to select one scanning mode.
Step 3: Place the device flat on the scanning surface. Then press and move it in a stable way. (Note: if you cannot scan the object from left to right, please try to scan up and down.)
Step 4: When the objected is found, the device will beep continually and a peck type will appear on the LCD display. Mark it with a pencil.
VIVREAL stud sensor has a beep alarm sound to tell you the “center states”. The directional indicators and the “center” signal keep users identifying the exact center of the stud, like arrow and edge on Electronic Wall Scanner LCD screen.
If you are a DIY home projector or professional contractor, VIVREAL stud finder is what you are looking for.
UPC: 712317090598
Package Dimensions: 48x173x249
