Brand: SUPROJDM
Features:
- This centerline marker kit is 100% complete This scriber uses 2 bearings. The body is made of 0.51″ x 0.51″ (13MM×13MM) stainless steel and is approximately 2-1/2″ long. The kit includes a steel body, 2 bearings, 2 washers, 1 aluminum alloy thumbscrews, and 1 Sharp carbide rods are ground for each hole.
- This scribe uses 2 bearings. The main body is made of 1/2″ X 1/2″ square steel and is about 2-1/2″ long. The kit includes a steel body, 2 bearings, 2 washers, 1 aluminum alloy thumbscrew, and 1 well-ground sharp carbide rod.
- The spacing between the bearings when assembled is about 0.282 (9/32″), so this can easily scratch the 1/4″ stock. The steel body is completely finished. No drilling or threading is required. The device will scribe any thickness from zero to 1/4″ thick. You rotate the scribe on the workpiece until the bearings touch each side. This is a self-centering design.
- The tungsten carbide rod is about 1-1/2″ long and about 1/8″ in diameter.
- One end has a slight chamfer, and the other end is professionally ground to an acute angle of 60 degrees
Details: This centerline marker kit is 100% complete This scriber uses 2 bearings. Body changed from 1/2″ X 1/2″ square steel to 0.51″ x 0.51″ (13MM×13MM) stainless steel, approximately 2-1/2″ long. The kit includes a steel body, 2 bearings, 2 washers , 1 Aluminum Thumb Screw and 1 Well – Grind Sharp Carbide Rod. Bearings are about 0.282 (9/32″) apart when assembled, so this can easily scratch 1/4″ stock .Steel body is fully finished. No drilling or threading required. This unit will score any thickness from zero to 1/4″ thick. You rotate the scriber on the workpiece until the bearings touch each side. This is an egocentric design. Tungsten carbide rods are approximately 1-1/2″ long and 1/8″ in diameter. One end is slightly chamfered, and the other end is professionally ground to a 60-degree acute angle
UPC: 781509966850
Package Dimensions: 29x85x118
