$38.49
Brand: SURIEEN
Features:
Details: Specification:
FCC ID: A269ZUA111
Button: 2 Button
Frequency: 434MHZ
Electronics Board: Yes
Battery: Yes
Transponder chip: Yes
Replacement for the following vehiche:
2003-2006 Baja
2001-2004 Forester
2000-2004 Impreza
1999-2004 Legacy
2000-2004 Outback
The programming is like this:
It is recommended that you sit in the driving position first to facilitate the following operations:
>1. With all doors closed, unlock all doors.
>2. Open and close the driver’s door (but do not lock the door), and then insert the key.
>3. Turn the key to the ON position (but do not start the car) and return to position 1 within 15 seconds, just above the LOCK position 10-12 times, and put it in the ON position until you hear the horn sound. This means that the programming mode has been activated.
>4. Open and close the driver’s door again.
>5. Press any key on the remote control. The horn will beep twice, then it has been successfully programmed on the remote control key. It is recommended that you try a few more times if you fail to program successfully the first time.
>6. Remove the key from the ignition switch. The horn will beep three times.
Important Note:
1. Please check and make sure your remote is using the same transmitter and chip as our items before buying. Picture: The image is of the real product. Please compare your car key, make sure your item is as same as our product before you purchase.
2. The keyblade needs to be cut at local dealer or a locksmith. You need to go to your local locksmith store to program it too.
3.Because of hand measurement, 1-2mm/inch deviation in size is a common thing, please check your size carefully before you buy it. (1 inch=1.00″)
Package included:
1PCS x 2 Button Keyless Entry Remote
Package Dimensions: 22x108x18
