The Edge Blaster Pressure Washer Attachment Accessory Tool (for use with Gas Pressure washers)

Brand: Pressure Point Solutions

Features:

• NEWLY PATENTED REVOLUTIONARY ACCESSORY TOOL. YOUR WAND CONNECTION MUST LOOK SIMILAR AND BE THE SAME SIZE AS THE CONNECTION IN THE PICTURES.
• FOR USE WITH GASOLINE PRESSURE WASHERS, (some electric pressure washers may not fit the Edge Blasters connection and are under powered for a good clean job). Just compare your connection to the connection in the pictures and make sure your pressure washer is 2500 PSI or greater. Wand should be 3 feet long or greater.
• ONE COMMON PROBLEM PEOPLE HAVE WITH THIS TOOL IS THAT THE GRASS IS NOT PROPERLY EDGED WELL BEFORE CLEANING. THE EDGING GROOVE MUST BE AT LEAST AN 1/8″ WIDE BY 3/4″ DEEP. Electric corded lawn edgers with steel blade are available on Amazon for a reasonable price. If Edge Blaster still sticks a bit when pushing forward just pull Edge Blaster backwards and it should not stick. PLUG YOUR PRESSURE WASHERS WHITE SPRAY TIP INTO THE EDGE BLASTER, THEN PLUG EDGE BLASTER INTO YOUR WAND.
• THE HIGH WATER PRESSURE LOCKS THE EDGE BLASTER IN PLACE. THE EDGE BLASTER WILL WORK WITH FORWARD MOTION OR CAN BE PULLED BACKWARDS IF GRASS IS NOT EDGED WELL. WE RECOMMEND PRESSURE WASHING THE EDGES FIRST AND THEN PRESSURE WASHING THE INFIELD.
• THE EDGE BLASTER MINIMIZES THE MESS OF PRESSURE WASHING. THERE IS A LEARNING CURVE SO READ ALL OF THE OPERATING INSTRUCTIONS CAREFULLY. PATENT US 9,522,408

Details: FOR USE WITH GAS PRESSURE WASHERS, (some electric pressure washers may not fit the Edge Blasters connection and are under powered for a good clean job). Just compare your connection to the connection in the pictures and make sure your pressure washer is 2500 PSI or greater. Spray wand should be 36 inches long or greater. Ideal length is 3 feet 6 inches long for the average height person. Your wand connection must look similar and be the same size as the connection in the pictures. GRASS MUST BE EDGED WELL BEFORE CLEANING, LEAVING AT LEAST AN 1/8″ GAP AND 1/2″ DEEP GROOVE BETWEEN CEMENT AND GRASS. PRESSURE WASH YOUR EDGES FIRST THEN PRESSURE WASH THE INFIELD. The Edge Blaster is a high pressure cleaning tool for cleaning the edges of driveways and sidewalks. The aluminum deflector plate will prevent high water pressure from directly hitting grass, flower beds, mulch etc. greatly minimizing the mess of pressure washing. Just edge your driveway or sidewalk first and then clean the infield with your wand or surface cleaner. PATENT US 9,522,408

UPC: 758763889553

Package Dimensions: 84x275x499