U3-HV USB DAQ Device with 4 Dedicated High-Voltage (±10V) Analog Inputs, 12 Flexible I/O for Analog and Digital Data Acquisition of Sensors, Controlling Relays, Automation and Timers

Brand: LabJack

Color: Red

Features:

• USB DAQ device with 4 dedicated high-voltage analog inputs, 12 flexible I/O, and 4 dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 16 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers.
• The U3 series is a versatile product for measurement and control within simple analog and digital systems.
• 4 High-Voltage Analog Inputs and 12 Flexible I/O (Digital Input, Digital Output, or LV Analog Input)
• Up to 2 Timers (Pulse Counting/Timing, PWM Output, Quadrature Input)
• Includes Free Software & Support for Life, 5 Years Warranty, Documentation and Datasheet written by US Engineers who designed the device

Details: Flexible I/O: The first 16 I/O lines (FIO and EIO ports) on the LabJack U3-LV can be individually configured as digital input, digital output, or analog input. The first 8 flexible I/O lines (FIO0-FIO7) appear on built-in screw terminals. The other 8 flexible I/O lines (EIO0-EIO7) are available on the DB15 connector. For more information, see Section 2.5 – Flexible I/O (FIO/EIO) of the U3 Datasheet. Analog Inputs: The LabJack U3 has up to 16 analog inputs available on the flexible I/O lines. Single-ended measurements can be taken of any line compared to ground, or differential measurements can be taken of any line to any other line. Analog input resolution is 12-bits. The range of single-ended low-voltage analog inputs on the U3-LV is typically 0-2.4 volts or 0-3.6 volts, and the range of differential analog inputs is typically ±2.4 volts (pseudobipolar only). For valid measurements, the voltage on every analog input pin, with respect to ground, must be within -0.3 to +3.6 volts. On the U3-HV, the first 4 flexible I/O are replaced with dedicated high-voltage analog inputs. The input range of these channels is ±10 volts or -10/+20 volts. The remaining 12 flexible I/O are still available as described above, so the U3-HV has 4 high-voltage analog inputs and up to 12 low-voltage analog inputs. Command/response (software timed) analog input reads typically take 0.6-4.0 ms depending on number of channels and communication configuration. Hardware timed input streaming has a maximum rate that varies with resolution from 2.5 ksamples/s at 12-bits to 50 ksamples/s at about 10-bits. For more information see the U3 Datasheet. For analog input information see Section 2.6 – AIN and Appendix A. For data rate information see Sections 3.1 – Command/Response and

UPC: 689076273862

Package Dimensions: 74x183x286