Brand: YOMAACAR
Color: Yellow
Features:
- Smart Tester – The battery tester intelligently analyzes the health status and recommends where to replace the battery. It is tailor-made for 12V/24V batteries. It is widely used in automotive lead-acid starter batteries, including regular flooded, EFB, AGM tablet batteries, AGM winding batteries, GEL batteries, WET, etc.
- Multiple Protections – Tester has input overvoltage protection and reverses connection protection. The low-frequency signal injection test does not need to connect to a significant load discharge test, and it will not cause damage to the battery. Premium copper clips feature reverse polarity protection and spark resistance for a stable and secure connection during testing
- 99.5% Accuracy – The tester can quickly and accurately detect the battery status and is displayed on the LCD screen in only 3 seconds to check the precise battery health data. Thanks to high-quality integrated chips, the accuracy rate of the test results of the battery health tester is as high as 99.5%
- Simple Operation – Connect the tester’s clip correctly to the car battery then it will turn on and be ready to test and analyze the battery; by moving the up/down buttons, you can see voltage, internal resistance, battery health and charge status
- Tips – First of all, please remove the screen protector before use. Like a phone screen, bright light will reduce the screen’s display clarity. When reading data in intense sunlight, tilt the tester 60° or view the display screen from the 6 o’clock orientation for a better view of the data
Details: Specifications:
Material: ABS
Applicable Battery Voltage: 12V/24V Voltage
Measure Range: 8-30V
Test Range: 3AH-200AH
Test result: SOH, SOC, CCA Value, IR, etc.
Test standards: CCA, SAE,DIN, IEC, EN, CA
Working Temperature: -40-60℃
Item Size: 150 * 90 * 35mm/ 5.9 * 3.5 * 1.4in
Item Weight: 325g/ 11.5oz
Package Size: 165 * 110 * 55mm/ 6.5 * 4.3 * 2.2in
Package Weight: 400g/ 14.1oz
Operation Steps:
(1) Clip the red clip to the positive pole (“+” pole) of the battery to be tested and the black clip to the negative pole (“-” pole) of the battery to be tested. light up;
(2) Use the up and down keys of the tester to select the corresponding battery type to be tested (STD (regular), AGM, GEL, EFB), and press the middle confirmation key “ENTER” to continue to the next step;
(3) Use the up and down keys of the tester to move the blinking rectangle, select the standard (CCA, IEC, SAE, EN, DIN, CA) corresponding to the battery to be tested, and then press the “ENTER” key to select it;
(4) During the test, if the selection is wrong, you can press the return key “ESC” or the system reset key “RESET” on the detector to reset.
Packing List:
1 * Car Battery Tester
1 * Manual
Package Dimensions: 54x206x422