Brand: ZOOZ
Features:
- WIRELESS BRIGHTNESS CONTROL: Turn your lights on or off and dim them with Z-Wave. Works with all of the LED’s other dimmers flicker with (120 VAC only, no 0-10V control)! Hub required (sold separately), scroll down for compatibility. Voice control with Z-Wave hub ONLY (will NOT work directly with your smart speaker).
- NEW 700 SERIES Z-WAVE: Boost your network with the latest Z-Wave technology that offers more range and faster communication speed than ever before. Each dimmer will act as a signal extender making your smart home mesh reliable. And if you need to troubleshoot connectivity issues, access a built-in range test tool straight from the switch!
- SIMPLE 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire other boxes. Just wire the Zooz in the box with direct connection to power and neutral (check your boxes before buying).
- FASTER INSTALLATION: The new model is just 1.16″ deep so it will fit a shallow or crowded box much easier! It takes half the time to install the S2 switches in 3-way and 4-way set-ups than for any other Z-Wave solution. Intuitive wiring diagrams are printed in the manual (look for more on the Zooz website) and if you need custom instructions, just ask!
- MORE FEATURES: Double tap to go from off to full brightness (single tap to last brightness level – now fully programmable if your hub supports advanced settings). NEW multi-color LED indicator with adjustable brightness level, night light mode, and many more features to customize the dimmer (if you have access to advanced features from your hub).
- LATEST SECURITY: Equipped with the new S2 authenticated security protocol and SmartStart for instant and safe pairing. Z-Wave Plus and ETL certified for communication and safety standards compliance. Lifetime tech support.
Details: NOTE: Check Wattage first: DON’T exceed 100 W for LED’s or 300 W for incandescent. Do NOT connect this dimmer to chandeliers, ceiling fans, receptacles, motors, or home appliances
NEUTRAL WIRE REQUIRED
SPECIFICATIONS: Model Number: ZEN77 Z-Wave Signal Frequency: 908.42 MHz Power: 120 VAC, 60 Hz Maximum Loads: 300 W Incandescent, 100 W LED’s Z-Wave Range: Up to 100 feet line of sight between the Z-Wave hub and the closest Z-Wave repeater Operating Temperature: 32-104° F (0-40° C) Installation and Use: Indoor only
Will it work with your smart speaker?
Smart speakers are not Z-Wave controllers so you will need a compatible Z-Wave hub to control this dimmer with voice.
Smart speaker compatible Z-Wave hubs include:
Fibaro Home Center Lite SmartThings (or the Aeotec Smart Home Hub) Hubitat Wink
UPC: 853478006773
Package Dimensions: 59x112x150