DEVMO 2 Pcs 5 Million Pixels CSI Interface Camera Module with 15cm 6 Inch Flexible Cable Compatible with Raspberry Pi 3, 3B+, 4 and Model A/B/B+

Brand: DEVMO

Features:

• ★Fits for Raspberry Pi Model A or B, B+, model 2, Raspberry Pi 3,3 B+, Pi 4.
• ★Model: Pi-CAM-5MP
• ★CSI interface: this interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth ink which carries pixel data from the camera back to the processor.
• ★Package content: 2pcs Camera Module and 2pcs 15cm FFC Cable.
• ★If your ice is too thick or not harvesting, the ice thickness control sensor may be faulty.

Details: Specifications: Angle of View: 54 x 41 degrees Field of View: 2.0 x 1.33 m at 2 m Full-frame SLR lens equivalent: 35 mm Fixed Focus: 1 m to infinity Max frame rate: 30fps Sensor: 5 Megapixels Omnivision OV5647 Interface: CSI Still picture resolution: 2592 x 144 Video Resolution: 1080p@30fps, 720p@60fps, 480p@90fps Focus Mode: fixed-focus Output Pins: 15Pin Output Signal: YCBCR4:2:2,RGB565,RAWRGB Optical Configuation: 4G+IR650 Module Size: 25*24*9mm Ribbon Length: 6 inchHardware connection: 1. Flexible flat cable, 90 degree vertical connector, the one next to the HDMI port. When connecting, the contact side faces the HDMI interface. 2. Tear off the protective film on the lens before use 3. Bare board, pay attention to ESD damage, beware of static electricity! Software use: 1. RPi firmware and raspi-config have been updated for the camera, please execute apt-get update; apt-get upgrade; 2. Select camera in raspi-config, start the camera driver in RPi firmware, and restart 3. Use command line programs raspivid and raspistill to operate the camera and capture video clips or images 4. The captured video clip needs to be played by mplayerHow to broadcast the camera data through live webcast: Through the nc command (ncat-Concatenate and redirect sockets), the input data of the camera is directly redirected to the network port for output.

Package Dimensions: 29x134x50