Mini Base USB HUB IO I/O Breakout Expansion Board for RPI Raspberry Pi Compute Module 4 CM4 4GB 8GB, with 40PIN GPIO Interface RJ45 Ethernet

Brand: STEMDIY

Features:

• Note:Raspberry Pi CM4 Board is NOT included.
• Mini base board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
• Onboard multiple connectors including: CSI/DSI/RTC/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot. The DSI display interface is the DSI0 interface, and the DSI1 display interface is not connected.
• FAN fans only support 5V fans, 12V is not supported, confirm the fan voltage before connecting.
• Comes with SSD mounting screw, easy to install. When using the M.2 interface, please use the matching screws.

Details: Mini Base Board (B) Designed For Raspberry Pi Compute Module 4 Note 1: This model only support 5V fan and cannot work with the 12V fan. Please confirm the fan voltage before connecting. 2: The DSI Display Port is connecting the DSI0 interface of the CM4, and doesn’t use the DSI1 display interface. 3: The Type C interface can be used for power supply or USB SLAVE interface for burning the image. 4: In order to ensure the normal power supply of CM4, please do not connect other devices when using the Type C interface to burn the image. 5: It needs to use a 5V 2A power supply for CM4. Otherwise, problems such as automatic shutdown, frequency reduction, etc. may occur. 6: When using the M.2 interface, please use the matching screws. Using screws of other lengths may cause the CM4 core to be damaged by the screws. 7: The module doesn’t have any protection circuit, please do not short-circuit the power supply. 8: USB2.0 is closed by default, if you need to open it, you need to add dtoverlay=dwc2,dr_mode=host in config.txt. 9.HDMI1 uses a flat cable output, if you need to use it, you can purchase an HDMI adapter. 10.This expansion board does not support POE function.

UPC: 765071656548

Package Dimensions: 0x0x0